Tile & Grout Cleaning
Hard Surface Process
Our professional and seasoned hard surface cleaning crew is here to serve.
We can clean almost any hard surface available on the market today. Below is our general process.
Step 1 | Inspection
We identify the type of hard surface to be cleaned. This will determine our cleaning method for that particular job.
Step 2 | Floor Prep
We take the time to protect your stainless-steel appliances by covering them with plastic. Next, we apply our eco-friendly cleaning product. This breaks down the oil and grease and preps it be scrubbed.
Step 3 | Agitation
Our go to machine is the CRB (counter rotating brush)
machine for scrubbing the floors with the cleaner. With our heavy duty brushes on we can scrub the tops of tiles and get into the grout lines to loosen all that dirt.
Step 4 | Extraction
We connect our tubo tool to our truck mount to extract all the water and cleaning product with the dirt and grime.
Step 5 | Floor Dry
We place our commercial air moves throughout the floor and areas that were cleaned. It usually takes around 10-15 minutes to completely dry. We then apply the sealer at this stage if requested.
Step 6 | Final Inspection
Once the job has finished, we will accompany you to review our work. This is the time to ask any questions you may have and to ensure you are satisifed with our work.
Hard Surfaces We Clean
⦿ Ceramic Tile
⦿ Hard Wood
⦿ Natural Stone
Tile & Grout Sealing
We always recommend you seal the grout lines after you’ve had the hard surface cleaned. If you decide you don’t want to do this, then the long term damage will be permanently stained grout lines. Prolong the life of your floors and don’t take that risk. We will get the job done.
Before & After
Minimum Price: $150
Hard Wood Floor
Request a Quote
Copiague, NY 11726